Yoshiaki Fujiwara 240mm workhorse gyuto:
Total lenght: 39.6 cm
Cutting edge : 24.2 cm
Spine to heel : 5cm
Handle lenght: 14.4cm
Handle: Arizona desert Ironwood and Bog oak
I had this knife for two years. In that time it was used constantly. I have thinned this knife twice. It still has some scratches from proper thinning. Picture show actual knife. This knife was cleaned with 80 grit C Powder prior to pictures, but I have packed it in to the kitchen foil, because I was cleaning the handle. This is a reason why there are some patina stains.
I can clean this knife, polish it and sharpen it prior to shipping.
The cost is £200 GBP (British pounds), which is 310$ + shipping. Payment by paypal.
Let me know if you want more pictures.
Syuuji Toyama Kasumi Usuba 240mm.
Steel: White Steel (can rust !!! )
Handle: Ho wood D shape
Approx.. measurements:
Handle Length- 150mm
Handle Width- 22mm
Handle to Tip Length- 395mm
Heel to Tip Length- 223mm
Blade Height at Heel- 55mm
Width of Spine at Handle- 4,5mm
Width of Spine Above Heel- 4mm
Width of Spine at Middle- 3,7mm
Width of Spine 1cm from the tip- 3,2mm
Weight- 335 g
I bought this knife some time ago. I used it to make one katsumaruki and to cut one carrot. It is brand new, never sharpened. I can make honbadzuke (opening of the knife) prior to shipping.
New knife cost £259.33 GBP (british pounds), which is 404.25$. I want £200 GBP, which is 310$ + shipping.
Oohira Tomae lv 4.5
Description from JNS website:
Final finisher for razors !! Works also great on tools, very inexpensive stone for that size .
Produce very nice semi mirro finish on knives but I recommend to use it with Nagura or slurry stone
This one is on harder side so Nagura is needed for tools
But for the price very good and big stone !!
Size: 205mm 80mm 25mm
Once I have try to cut a piece of that stone with no results at all. Because of that have left some mark on the stone.
Okazaki Takeshi Saya Nomi 14mm
Description from JNS website:
''Since i started to make some sayas, for my self but also for some of my customers that want saya with they knives.
I bought my self Saya nomi ( Chisel for sayas)
It
is custom ordered from a very skild blacksmith, 85 years old Okazaki
Takeshi from Sanjo. He making chisels mostly from White steel.
As he do not have any to fallow his work , these will be the last chisels from his generation !
Steel: White 2 (high carbon)
Handle: Red Oak
Chisels total length is 470mm
Blade length 235mm
Blade width 14mm
Blade thickness 3,3mm''
This chisel is very cool. It is a little bit flexbile, which allow you to make knife slots in sayas very efficiently.
Cost is £100GBP (British pounds), which is $155 + shipping.
Brak komentarzy:
Prześlij komentarz